• Steel pallet and plastic film packing protects materials and speeds container unloading.
• Higher quality windows and doors avoid fragile low-cost alternatives found in the market.
• Cement-based MGO subfloor board offers strength and waterproof performance.
• Double skin 0.4mm sandwich panels resist damage better than thinner steel sheets.
• Bending machine columns ensure exact holes for easier on-site installation.

somtimes some clients will say that they received cheaper quotation.

dingrong's houses are 100% for export,and our main market is australia,europe,USA etc,we are choosing the higher quality materials with resonable price.so we admit that we are not the lowest price in the market.

the difference of our materials from others are as follows

1. our package is steel pallet+plastic film,easy to load and unload,it is also a good way to protect the materials.our this kind package will increase around USD 70 cost per house.

other suppliers usually load the materials pieces by pieces in container,to unload 1*40HC container,4 workers usually take one day.and the materials are easy to be damaged.

2.we are using higher quality windows and doors,there are very cheap windows and doors in the market.we will not use these,because they are very fragile

3. most of the supplier are using common type MGO board,it is not very strong and not good for waterproof.our MGO board is with cement inside,it is new type subfloor material,strong and good for waterproof.

4. we are using higher quality sandwich panel,double skin 0.4mm thickness,and some suppliers will use sandwich panel with double skin 0.3mm(although some supplier said their sandwich panel uses 0.3mm steel sheet,the exact thickness of the steel sheet is just 0.25mm,it is very thin,and can be easily damaged by a thief)

5. our column is made by bending machine which make the holes exact,and easy to install.now most of the supplier are making the column by cold forming machine,sometimes the holes are not exact,and hard to install

6. our bottom secondary beam is 14pcs(the space between two beams is around 380mm,the floor will not shake greatly),and most of the suppliers will use 9pcs(the space between two beams is around 570mm,the floor will shake greatly)

7. our frame without powder coating is 2.3mm,some supplier’s thickness is just 1.8mm,so they need to add support beam in the middle,the beam is thin,if without the support beam,the house will collpapse.

8. we are using new type ceiling panel which makes it more beatiful than others

9. we can ensure that all the provided materials will be the same as the specification sheet.now some supplier will supply lower quality materials than their specification sheet.

the houses with very cheap materials can be only used for a very short time,and the inappropriate packing way will will make the materials very easy to be damaged during shipping.